Changing Seam Direction on Layouts
Occasionally, you may need to draw a counter with abnormal depth. In these cases, the seams may be drawn in the wrong direction. There is a way to change the directions that the seams are defined.
If your counter has dimensions of 45" X 80", the seams will be drawn like this on Step 5 (when selecting "Define Seams"):
To define the seam in the perpendicular direction, go to Step 1 on the drawing and switch the length/width dimensions (80" X 45"). When you return to Step 5 and Define Seams, the direction of the seam will be lengthwise: